Starter Tread Kits

When you want to accent the bottom of the stair case there is not better way to do that than with our Bull Nose Tread Kits.  These stair treads look great with a box newel, a pin top newel, and a attached volute to the rail.  Iron newels are also an option if your are using an iron balustrade. No matter what you use as newels,  our Bull Nose Stair Treads are the starting point to an awesome staircase.  Each Starter Tread Kit contains:

• Bull Nose Starter Tread
• curved riser
• Circle Cove and Shoe Molding Kit

These starter treads like our standard tread are 11 1/2″ wide.  The nosing has a 1 1/2″ overhang.  

Whether your stairs are open only on one side or open on both sides, we have the right starter treads for you.  If your stairs are open on one side, then you need our Single Bullnose Starter Treads.  If the stairs are open on both sides, then our Double Bullnose Starter Step
are the perfect starter tread for you.

Bull Nose Shoe MouldWe are now happy to offer just the curved shoe mold to fit the starter steps.  Do NOT order this with the Starter Step, it comes in the KIT.  This is a great addition if you are replacing carpet with hard woods, or having to make changes to your floor, but do not want to redo your floors.

The curved shoe radius will fit a 10″ wide starter step wrap.  To verify the width of your starter step, lay the the straight edge against the back and front edge and measure in between.  Or make marks on the floor and measure between those marks to get the width.

If you want a different size, contact us so we can get you a custom quote!

Curved Cove 

We are now happy to offer just the curved cove to fit the starter steps.  Do NOT order this with the Starter Step, it comes in the KIT.  This is a beautiful trim piece that goes directly under the starter tread to make a clean transfer from tread to riser!

The curved cove radius will fit a 10″ wide starter step wrap.  To verify the width of your starter step, lay the the straight edge against the back and front edge and measure in between.  Or make marks on the floor and measure between those marks to get the width.

If you want a different size, contact us so we can get you a custom quote!